Reducing inventory is a big concern with utilities these days. This is primarily driven by the fact that reducing inventory means reduced costs. Reducing costs means that the profit margin can be higher. So, what does that have to do with high accuracy CT’s? How can high accuracy CT’s reduce inventory?
Use the Extended Range of High Accuracy CT’s
When placing new CT’s in service we traditionally had a variety of different CT ratios to choose from. Among the most popular are 200:5, 400:5 and 600:5 variants. This means that when a new service is built the meter tech or engineer will look at the service and size the CT’s according to the projected load. This is done because we want the amps on the service as close to the nameplate rating as possible. We do this because standard CT’s are most accurate at their nameplate rating up to their rating factor.
So, if we have a 400 amp service that is projected to normally run around half of that or less we may use 200:5 CT’s with a rating factor of at least two. This ensures that when the amperage is low we can measure it as accurately as possible.
Enter the new kid on the block. The high accuracy CT. With the high accuracy CT, with its extended range features we can now use one size CT for most of our installations. For instance a 600:5 high accuracy CT will allow us to measure down to 30 amps. But there is more. Many manufacturers are offering these high accuracy CT’s with extended ranges that can measure down even further.
How can High Accuracy CT’s be useful in Reducing Inventory?
High accuracy CT’s can reduce inventory by reducing the number of different ratios that you need. You can now purchase a 600:5 CT with a rating factor of 2 or more that can cover all your needs. This means that you no longer need to use 200:5 or 400:5 CT’s. You can stock one size. This allows you to purchase less. Even if you do not have a new job coming up, in the past you would have needed to keep a certain number of 200:5 and 400:5 CT’s on the shelf for emergencies.
So, instead of having a couple of sets of each size, you can have just a couple of sets of 600:5 CT’s that can be used for each service type. Instead of having purchased four sets of CT’s now you have only purchased two. This is beneficial to reducing inventory and cutting costs. Also, it leads to a reduction in storage space as well.
Conclusion
High accuracy CT’s can be a great way of reducing inventory in your meter shop or warehouse. Look at what you have stored in your warehouse and see if you could benefit from reducing the number of CT’s that are just sitting on the shelf as spares. If you are interested in high accuracy CT’s check out the offerings from Peak Demand.